Windows 2003 and gpt and cluster

Returns: Help Command List. At the prompt, type: exit to quit the Diskpart utility. There is no partition selected. Please select a partition and try again. There are no partitions on this disk to show.

Office Office Exchange Server. Not an IT pro? Resources for IT Professionals. Sign in. United States English. Afterwards, can you see the whole 2. Reviewing Storage Limits. Hope it helps.

Hi David, Thanks for your reply. I have tried converting to Dynamic, but it hasn't helped. Anyway, I'm not sure dynamic is going to gain me anything. If I read the link you gave me correctly, it is then recognized as a single drive which only allows me to set up as a simple volume which has a 2TB limit.

The part I don't understand is why does see it but doesn't??? I opened a support case with Intel but they told me it was a Windows issue or a hardware issue. I suppose I should have stated that the hardware I am using is an industrial computer the company I work for manufactures.

But the design and the processors, chipsets are all Intel's. AND, an Intel motherboard that we use for reference in our design does the same thing. I am going to test other boards we manufacture with to see if they all do the same thing. If you have any other suggestions, I will gladly try anything. Office Office Exchange Server. Not an IT pro? Windows Server TechCenter.

Only fixed disks and removable disks are listed. Removable disks include and USB disks. Use the select disk command to set the focus to the disk that has the specified disk number. If you do not specify a disk number, the command displays the current disk that is in focus. Click Start , click Run , type diskmgmt. To verify that an existing partition is aligned, divide the size of the stripe unit by the starting offset of the RAID disk group.

These examples show that the partition is not aligned correctly for a KB stripe unit size until the partition is created by using an offset of sectors bytes per sector. The number of disks in the array group does not affect the partition alignment. The factors that affect partition alignment are stripe unit size and partition starting offset. Click Start , click Run , type cmd, and then click OK.

Notice the value of BlockSize and of StartingOffset for each given partition. The Index value that is returned by this command indicates whether a partition is the first partition, the second partition, or other partitions for a given disk drive. For example, a partition index of 0 is the first partition on a given disk.

To determine how many disk sectors a given partition starts from the beginning of the disk, divide the value for StartingOffset by the value of BlockSize. In the example in step 2, the following calculation yields the partition starting offset in sectors:. Skip to main content.